Corrugated Board Making Plant

Product Details:

1. Electric Roll Stand. 1600mm

Technical Parameter:

• Max diameter of the paper roll: l1500mm
• Expiry width: 600mm-1600mm
• Electrical adjust the up-low, clamp-loosen, movement and center.
• The tighten adjust adopt pneumatic or manual brake, expandable chuck.

2. DG- Pre- Heater

Technical Parameter:

• Diameter: 600mm.
• Expiry width:1600mm.

• The surface of the roller are trated with grinding and polishing. 

3: Vacuum Single Face Paper Corrugation Machine:

Technical Parameter:

• Design speed: 100m/min
• Expiry width: 1600mm
• Roller diameter: l280mm
• Pre-heater roller: l280mm

Product Characteristic:

• Vaccumabsorb type guide paper with wind control.
• The glue roller are guide slippage, convenient to remove and install.
• Up roller, press roller, glue roller adopts pneumatic control.
• Corrugated roller, bearing of the press rolleradoptthermo stable grease lubricate.
• The up and down corrugated rollers use high-grade Ni-Cr alloy material, heat treated, hardness is HRC55 - 58. The surface is grinded, can also dealt with chrome plated. 

• Design speed: 100m/min.
• Expiry width: 1600mm.

• Roller preheater 1600 mm
• Expiry width 1600 mm
• The surface of each rollers are dealt with grinding and chromeplated, clean and wearable.
• Butterfly shape. ensure the reel paper receive heat uniformly.

• Glue roller diameter: 219mm. The surface of the glue roller is dealt with net carving and chromeplate.
• Pneumatic control the raise and down of the press roller.
• Separate frequency conversion drive is choosable.
• Can choose touch press system. 

Product Details:

• Max diameter of the paper roll: φ1500mm
• Expiry width: 600mm-1600mm
• Electrical adjust the up-low, clamp-loosen, movement and center.
• The tighten adjust adopt pneumatic or manual brake, expandable chuck.

2: DG- Pre- Heater

Technical Parameter:

• Diameter: 600mm.
• Expiry width:1600mm.

3: Vacuum Single Face Paper Corrugation Machine:

Technical parameter 

• Design speed: 100m/min
• Expiry width: 1600mm
• Roller diameter: φ280mm
• Pre-heater roller: φ280mm

Product characteristic 

• Vaccum absorb type guide paper with wind control.
• The glue roller are guide slippage, convenient to remove and install.

4: Transport Bridge:

Technical Parameter 

• Design speed: 100m/min.
• Expiry width: 1600mm.

5: RG-Tripe Pre Heater:

Technical Parameter:

• Roller preheater φ600mm
• Expiry width 1600mm
• The surface of each rollers are dealt with grinding and chrome plated, clean and wearable.
• Butterfly shape. ensure the reel paper receive heat uniformly.

6. Gluer:

Technical Parameter: 

• Glue roller diameter:φ219mm
• The surface of the glue roller is dealt with net carving and chrome plate.
• Pneumatic control the raise and down of the press roller.
• Separate frequency conversion drive is choosable.
• Can choose touch press system.

Technical Parameter:

• Design speed: 100m/min
• Expiry width:1600mm

7.DF-500 Double Baker System:

Technical parameter:

• Design speed: 100m/min
• Expiry width 1600mm
• Temperature:160-200.
• Steam pressure: 0.8-1.3Mpa
• Power: 55kw
• Hot plate:11x600mm units

Capability:

• The surface of the hot plate is vetted.
• The hot plate is dense type, electric control the up and down.
• Can adopt Section pressure or whole pressure according to the layer of the production line. which is favor of the molding of the paperboard.

8. Thin Blade.

Technical Parameter

• Design speed: 100m/min
• Expiry width???1600mm
• Five knife eight press line.

9. Rotary Knife Cutter 1600mm

Technical Parameter

• Design speed: rotary knife 100m/min
• Expiry width: 1600mm
• Cutting scope: 500-9999mm. Cutting precision:±1mm.

Capability:

• The knife axis is small, the girth of the knife is short. average speed is high. can improve the production efficiency.

10.Sheet Delivery System

Technical Parameter

• Max. width of paperboard:2500mm.
• Automatic stack and collect cardboard.
• With electrical transmit horizontally.
• Vertical meet cardboard adopt wide conveyer belt to transmit.

11. Glue Making System:

• Two big glue tank one small glue tank
• Steam system (one set, without boiler and pipe).

Product Details:

• Can adapt Section pressure or whole pressure according to the layer of the production line. which is favor of the molding of the paperboard.
• Up cotton belt is handled adjust the precision, the tension is hydraulic adjust. Down cotton belt has tension and left-right adjust system.
• The cooling and finalizing part adopt denseness and suspend type press roller design.
• There is skid proof rubber outside of the drive roller. Prolong the use life of the cotton belt.

Product Details:

Being a customer focused organization, we are engaged in offering a wide assortment of 3 Ply Automatic Paper Corrugated Board Plant. The products we are offering are made with the help of skilled and semi-skilled labors using quality raw material and advanced facilities to ensure flawlessness. Our range is known for high performance, robust construction, longer life and sturdiness. Further, patrons can avail our range as per the clients specifications.

3 ply corrugated box making plant:

• High speed bearing mounted corrugation machine with variable speed drive
• Drum type heaters - 2 nos
• Self loading reel stand- 3 nos
• Duplex heating unit before gluing
• On line simplex pasting unit
• Heating cooling and drying chamber (consist of nine hot plates)
• Heavy duty pull unit
• On line creasing and slitting unit
• Heavy duty cut off unit. The plants above include complete fabrication and synchronization of all machines together
• Overhead bridge and conveyor take up belts. Motorized web adjustment unit, gangway and stairs.

Product Details:

• The material is high quality CrMo alloy steel or quality roller coated with tungsten.
• Flute is UV shape which is widely used in the world, low paper shrinkage,high quality and strong paperboard.
• Adopt imported precision machine tools,advanced molding grinding and electroplating,flute precision apply to national standard.
• The surface of corrugated roller flute teeth are middle-frequency quenched,hardness reach HRC60,upper corrugated roller is drum shape,with long life.

Product Details:

Bestowed by state-of-the-art infrastructure facility, we manufacture and export superior-grade Triple Preheater. We make use of optimum grade raw material and components to fabricate the offered range of duplex preheaters. These duplex preheaters are widely known among the clients for their trouble-free functioning, user-friendliness and longer functional life.

Features:

• Less amount of adhesive consumption

• Auto-circulating glue feeding with no glue depositing

• Self-preheating device speeds up glue gelling

• Plated with chrome treatment, surface of glue roller embossed with netting design

• Surface of doctor roller grinded and plated with chrome treatment

• Surface of pressure roller plated with chrome treatment

• Preheating rollers

• Up-down adjustment of pressure roller controlled through pneumatic system.

Product Details:

• Automatic stack and collect cardboard.
• With electrical transmit horizontally.
• Vertical meet cardboard adopt wide conveyor belt to transmit.
• The sheets or height of cardboard will be moved out by switch control when reaching request.