Box Making Machine

Product Details:

Features:

• The vacuum suction-type feeding system can lead the paper accurately into the machine
• Cycle stacking planes could stack the next batch paper well in a state of non-stop working , more efficient. Bottom sheet use suction auto feeding, automatic tracking according to the face paper's speed.
• New concept front gauge location, position high accuracy, bottom sheet never pull ahead.
• Machine uses touch-screen/PLC/servo motor control system, circuit system is stable and could display the failure alarm automatically.
• Automatic gluing and the glue can be used circulatory, avoid glue waste.
• Roller design scientifically, avoid glue fly out when the speed is high.
• Pressure rollers adopt one side adjustment, convenient and fast.
• Rocker controls wash roller's fluctuation, easy cleaning.
• Counter designs scientifically, easy recording the amount you have been worked.

Product Details:

Machine Specifications:

• Suitable for cutting and creasing the corrugated Boards. The machine is fitted with 4 bars (2 in front & 2 in back) front bars are fitted with cutting dies and the rear bars are fitted with creasing dies, side wheel adjustment is provided for increasing and decreasing the height as per requirement.

Product Details:

Technical Parameter:

• Max diameter of the paper roll: φ1500mm
• Expiry width: 600mm-1600mm
• Electrical adjust the up-low, clamp-loosen, movement and center.
• The tighten adjust adopt pneumatic or manual brake, expandable chuck.

2: DG- Pre- Heater

Technical Parameter:

• Diameter: 600mm.
• Expiry width:1600mm.

 

3: Vacuum Single Face Paper Corrugation Machine:

Technical parameter 

• Design speed: 100m/min
• Expiry width: 1600mm
• Roller diameter: φ280mm
• Pre-heater roller: φ280mm

Product characteristic 

• Vaccum absorb type guide paper with wind control.
• The glue roller are guide slippage, convenient to remove and install.

4: Transport Bridge:

Technical Parameter 

• Design speed: 100m/min.
• Expiry width: 1600mm.

5: RG-Tripe Pre Heater:

Technical Parameter:

• Roller preheater φ600mm
• Expiry width 1600mm
• The surface of each rollers are dealt with grinding and chrome plated, clean and wearable.
• Butterfly shape. ensure the reel paper receive heat uniformly.

6. Gluer:

Technical Parameter: 

• Glue roller diameter:φ219mm
• The surface of the glue roller is dealt with net carving and chrome plate.
• Pneumatic control the raise and down of the press roller.
• Separate frequency conversion drive is choosable.
• Can choose touch press system.

Technical Parameter:

• Design speed: 100m/min
• Expiry width:1600mm

7.DF-500 Double Baker System:

Technical parameter:

• Design speed: 100m/min
• Expiry width 1600mm
• Temperature:160-200.
• Steam pressure: 0.8-1.3Mpa
• Power: 55kw
• Hot plate:11x600mm units

Capability:

• The surface of the hot plate is vetted.
• The hot plate is dense type, electric control the up and down.
• Can adopt Section pressure or whole pressure according to the layer of the production line. which is favor of the molding of the paperboard.

8. Thin Blade.

Technical Parameter

• Design speed: 100m/min
• Expiry width???1600mm
• Five knife eight press line.

9. Rotary Knife Cutter 1600mm

Technical Parameter

• Design speed: rotary knife 100m/min
• Expiry width: 1600mm
• Cutting scope: 500-9999mm. Cutting precision:±1mm.

Capability:

• The knife axis is small, the girth of the knife is short. average speed is high. can improve the production efficiency.

10.Sheet Delivery System

Technical Parameter

• Max. width of paperboard:2500mm.
• Automatic stack and collect cardboard.
• With electrical transmit horizontally.
• Vertical meet cardboard adopt wide conveyer belt to transmit.

11. Glue Making System:

• Two big glue tank one small glue tank
• Steam system (one set, without boiler and pipe).

Product Details:

This production line is a semi-automatic production line, which is composed or paper roll stand, corrugated card board converting machine and paper cutting machine. The line can continuously produce all kind of size single side corrugated paper. The line is the advanced process, high efficiency and can produce in large quality. It is an ideal equipment for middle and small size paperboard carton manufacture factories with improved technology.

Product Details:

Specifications:

• Suitable for cutting paper, corrugated liners &boards.The machine is fitted with front and back guides for measurement and the blade is perfectly balanced for smooth cutting.

Product Details:

Usage and Features:

• Automatic feeding bottom paper, frontage pushing face paper, feeding paper fast and lower work intensity.
• Localization bottom never goes beyond, suitable for laminating the paperboard together and for laminating the paperboard with the A/B/C/D/E corrugated cardboard together.
• Bottom paper and face paper can fore-and-art adjustment, easy to laminate Feeding glue system are automatically controlled by the liquid relay, the thickness of glue can adjust. Gluing uniformity, lower glue cost.
• Control panel, electromagnetism clutch without touch point relay, the position is monitored by the photoelectric switch, digital automatic counter.
• High precision laminate, the finished products are of smooth surface edge and of high intensity.
• The whole structure is compact, with beautiful appearances and high work efficiency.
• Laminate Precision Mm ≤±1.5 

Product Details:

Machine Specifications: 

• Suitable for pressing of pasted corrugated boards, The machine is fitted with heavy gauge screw rod for pressing the boards pasted in the pasting machine.

Product Details:

Suitable for pressing of pasted corrugated boards, The machine is fitted with heavy gauge screw rod for pressing the boards pasted in the pasting machine.

Product Details:

Suitable for pressing of pasted corrugated boards, The machine is fitted with heavy gauge screw rod for pressing the boards pasted in the pasting machine.

Product Details:

Machine Specifications:

Suitable for cutting and creasing the corrugated Boards. The machine is fitted with 4 bars(2 in front & 2 in back) front bars are fitted with cutting dies and the rear bars are fitted with creasing dies, side wheel adjustment is provided for increasing and decreasing the height as per requirement.

Technical Parameters:

Product Details:

Machine Specifications:

Suitable for cutting and creasing the corrugated Boards. The machine is fitted with 4 bars(2 in front & 2 in back) front bars are fitted with cutting dies and the rear bars are fitted with creasing dies, side wheel adjustment is provided for increasing and decreasing the height as per requirement.

Technical Parameters:

Product Details:

Suitable for cutting reel into sheets and cutting 2 ply corrugated liners (Can be synchronized with corrugation either electrically/mechanically). The machine is fitted with PIV gear box for changing the cutting lengths, variable speed pulley for increasing and decreasing the speed of the machine and a convey for traveling of sheets.

Product Details:

Ours is a renowned organization, which is engaged in manufacturing and exporting a wide range of high quality. These liner preheaters are designed & developed by our professionals adhering to the industry laid standards. Offered array of liner preheaters is widely acknowledged among the customers for its energy efficiency, user-friendliness and efficient functioning.

Features:

• Preheating roller
• Fixed pinch roller
• Movable pinch roller with limited switch

Product Details:

Machine Specifications: 

• Suitable for pressing of pasted corrugated boards, The machine is fitted with heavy gauge screw rod for pressing the boards pasted in the pasting machine.

Product Details: